I'm doing a simple compression testing on a cylindrical sample and was analyzing the strain distribution on it. I see the various strain ranges on the sample differentiated by various colours. How can I calculate the volume of the sample material in a particular strain range?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Volumes for Individual strain ranges in a strain distribution
- Thread starter svchakra
- Start date
Do you have an iso-surface plot option?
TOP
CSWP, BSSE
"Node news is good news."
TOP
CSWP, BSSE
"Node news is good news."
- Thread starter
- #3
- Thread starter
- #4
Hello Kellnerp,
Thanks for the tip. Ya it was useful. I used the Capped Isosurface option. It shows the elaments with the same strain values. But can any one share how to find the volume of the material shown using capped isosurface? Thanks in advance.
Thanks for the tip. Ya it was useful. I used the Capped Isosurface option. It shows the elaments with the same strain values. But can any one share how to find the volume of the material shown using capped isosurface? Thanks in advance.
- Thread starter
- #5
Hello guys,
I used the Capped Isosurface option. It shows the elements with the same strain values. But can any one share how to find the volume of the material shown using capped isosurface? This help is urgently needed. Will be very thankful if some one can share his thoughts. Thanks in advance.
I used the Capped Isosurface option. It shows the elements with the same strain values. But can any one share how to find the volume of the material shown using capped isosurface? This help is urgently needed. Will be very thankful if some one can share his thoughts. Thanks in advance.
- Status
Similar threads
- Locked
- Question
- Locked
- Question