Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Volume meshing in Lusas

Status
Not open for further replies.
netsonicyxf

netsonicyxf

Structural
Joined
Feb 19, 2010
Messages
53
Location
US
As you can see, if I use Automatic meshing option
1_bqtq0a.png
,

There are 4 divisions along Z dir.
2_j5xqgw.png


If I want to change it to 2 divisions along Z dir,
3_ooqirr.png


There are errors

How to change the divisions from 4 to 2 along Z dir?

The model (v19.1) is attached.

 
Status
Not open for further replies.

Similar threads

netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
D
  • Locked
Meshing in Femap
Replies
3
Views
2K
rb1957
rb1957
AdRo777
  • Locked
  • Question Question
Modelling Isolators on Lusas
Replies
1
Views
295
bkal
bkal
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
Lumbisno
  • Locked
  • Question Question
Meshing a hole with concentric Q8 - Nx 12
Replies
7
Views
578
Lumbisno
Lumbisno

Part and Inventory Search

Sponsor

Back
Top