Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Voltage Regulator

Status
Not open for further replies.

kpsig

Electrical
Joined
Nov 21, 2001
Messages
15
Location
GR
What is the difference of regulator AN78xxF to the typical 1A regulators?
Where can i download it's datasheet?

THNX
 
This device is made by Panasonic and the various voltage versions seem to be rated at 2A max output current. The main difference between the AN78xx and the AN78xxF is that the F version package only has a maximum power dissipation of 10.25W compared to 15W for the non-F version.

I viewed the data sheet at - but you have to register. You shpuld be able to get it directly from the Matsushita/Panasonic site.
 
I have seen that on PCBs of Fanuc CNC Power Supply, Spindle/Servo Amplifiers they only use AN78xxF regulators. It also seems that this type of regulator is, also, extremely stable at operation, producing very little noise/ripple.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top