Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

VOC measurement device 2

Status
Not open for further replies.

ED33

Chemical
Dec 24, 2003
19
Hi everybody,
I would like to measure Total VOC concentration of each paint stack and out of VOC. I need special device for this
First, Online measurement of Total VOC (2-3 hrs. online measurement). Than, Measurement of each compound (Benzene, Toluen, Xyliene, Methyl Ethyl ketone , etc.

Could You prefer me such type of device please .
 
Replies continue below

Recommended for you

ED33, I could spec. an instrument for you, but they require a tremendous amount of training and calibration to get them to work correctly and give accurate results. These are not the kind of instruments, you can take out of a box, hookup and run.

My suggestion would be to contact an environmental lab or contractor that can do the work for you and complete a report with all the necessary calculations/conversions required.

Hope this helps.
saxon
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor