Vista for x64 with SP 2. Compatible?

[mdristy]

Is anyone using Wildfire 4.0 (M080)on a Vista 64-bit computer with Service Pack 2 installed? Just want to know if Wildfire 4.0 will work okay with it before I install the service pack. I also use Intralink 3.4 (M062) Client on the same computer.


Thanks.

 

[williaps]

PTC will NOT be supporting Pro/ENGINEER for Windows Vista SP2. They will focus their efforts on Windows 7.

 

[mdristy]

Is there any indication Wildfire 4.0 won't work reliably on Vista 64 SP2? Seems odd that PTC would leave all us users of that OS out to dry.

 

[orac]

Hi,


I'm running WildFire 4 and Pro/Mechanica both Build M80 on Vista 64 SP2 without any problems.


Best regards,


John Bijnens
http://cad2cam.khlim.be

 

[mdristy]

I was hoping someone would give me that answer. Thanks for helping put my mind at ease about installing SP 2! I'll do it later today. Mark

 

[mdristy]

UPDATE: I installed SP 2 a few days ago and so far both Pro/E Wildfire 4.0 (M080)and Intralink (Client) 3.4 (M062)are working just fine.