-
1
- #1
TitaniumLeg
Industrial
- Jan 23, 2007
- 13
This is something I came across the other day and I thought it may be useful info for others.
SW2007 SP2.2
Problem:
I recently ran ito a situation where I was trying to create a drawing from a Part/Assembly and when the View Palette popped up it was empty. What made it really strange was that it only happened on "B" and "D" size drawings.
Solution:
The last time someone edited the drawing templates they saved the "B" and "D" size templates in the "Edit Sheet" mode. I went back and opened the templates, saved them in the correct mode and shazam...another happy ending.
Titanium Leg
SW2007 SP2.2
Problem:
I recently ran ito a situation where I was trying to create a drawing from a Part/Assembly and when the View Palette popped up it was empty. What made it really strange was that it only happened on "B" and "D" size drawings.
Solution:
The last time someone edited the drawing templates they saved the "B" and "D" size templates in the "Edit Sheet" mode. I went back and opened the templates, saved them in the correct mode and shazam...another happy ending.
Titanium Leg