Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

View>hide all types-causes screen to minimize

Status
Not open for further replies.

toycept

Mechanical
Joined
Jan 28, 2004
Messages
294
Location
US
Just upgraded to SW1014. A problem I'm having....When I go to the View Menu and click on HIDE ALL TYPES"
this causes the entire screen to minimize. Anyone else experiencing this? A real pain. Any fixes?
 
video card is Nvidia Quadro 2000. Driver version is 9.18.13.3523
 
The only fix I can think of is to stop hiding all types...probably not much help though.

Jeff Mirisola, CSWE
My Blog
 
I don't know a fix. I don't use Hide All Types. I uncheck everything to hide, then check on if I want to see something.
If you're not on SP4.0, maybe try upgrading.

Chris, CSWA
SolidWorks 14
ctopher's home
SolidWorks Legion
 
Thank you for all the replies and help.

Turned out to be a graphics card issue. When I updated to 2014 sp4 I needed to upgrade
my Nvidia driver. I just did and that solved the problem
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top