Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

VIEW ANGLE

Status
Not open for further replies.
heidy

heidy

Aerospace
Joined
Apr 18, 2006
Messages
24
Location
CZ
Hi,
i need to set an angle to my 2D view...
I know about possibility to change it in properties of the view, but to get (measure)the angle is sometimes complicated.
Is there any other possibility for view rotation (for e. acc. to geometry)...?

Thanks
heidy
 
Sort by date Sort by votes
Create a horizontal or vertical line in the drawing and use it as a reference when measuring the angle.
 
Upvote 0 Downvote
Unfortunatelly there is not always any line in the view for measuring, second thing is that in properties the value is rounded..:o(
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Question Question
Detail View - Section View
Replies
0
Views
1K
Proportions
P
A
  • Question Question
DRAWING PROJECTION ANGLE CHANGING
Replies
1
Views
4K
jackk
jackk
A
  • Question Question
CATIA Macro to give Overall Dimensions to a View
Replies
3
Views
836
ferdo
ferdo
Chris Bills
  • Locked
  • Question Question
Catia 2D View Fix
Replies
3
Views
2K
Chris Bills
Chris Bills
sri91
  • Locked
  • Question Question
Leader target as view
Replies
0
Views
291
sri91
sri91

Part and Inventory Search

Sponsor

Back
Top