Behzad1991
Mechanical
I want to find natural frequencies and amplitude of this system. Can anyone help me finding mass and stiffness matrices by using Lagrangian method?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Vibratory conveyor vibration analysis 1
- Thread starter Behzad1991
- Start date
- Status
GregLocock
Automotive
How many natural frequencies are you expecting?
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Thread starter
- #3
Behzad1991
Mechanical
As I started to model it based on 3 dof, I expect 3 natural frequencies.
-
1
- #4
GregLocock
Automotive
So most of the drawing shown is irrelevant detail. Rather important to know.
Sorry can't help you with Lagrangians, not my cup of tea.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Sorry can't help you with Lagrangians, not my cup of tea.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
mfgenggear
Aerospace
@behzad1991
there is a ton of stuff on the internet, I don't know jack but may this can be a lead.
there is a ton of stuff on the internet, I don't know jack but may this can be a lead.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
- Locked
- Question