Guest
What are the main vibration parameters?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
If we are talking about forced harmonic viberation like the unbalance in rotating macinery then factors are:<br>1-Frequency<br>2-Amplitude<br>3-Natural frequency<br>4-Damping factor<br>5-Harmonic excitation force<br><br>I hope the above helpful,<br><br>BYYYY
dgallagher
Mechanical
Main three parameters of Vibration:
1. Amplitude (Displacement, Velocity or Acceleration)
2. Frequency (Hz or CPM)
3. Phase
There are many good books available on Vibration Analysis. Recommendations include:
"Vibration Primer" by Charles Jackson
"Vibration Spectrum Analysis : A Practical Approach" by Steve Goldman
" Machinery Malfunction Diagnosis and Correction: Vibration Analysis and Troubleshooting for Process Industries" by Bob Eisenmann Sr and Jr.
Books are available at
1. Amplitude (Displacement, Velocity or Acceleration)
2. Frequency (Hz or CPM)
3. Phase
There are many good books available on Vibration Analysis. Recommendations include:
"Vibration Primer" by Charles Jackson
"Vibration Spectrum Analysis : A Practical Approach" by Steve Goldman
" Machinery Malfunction Diagnosis and Correction: Vibration Analysis and Troubleshooting for Process Industries" by Bob Eisenmann Sr and Jr.
Books are available at
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
- Locked
- Question