Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vibration Modelling of Pipework

Status
Not open for further replies.
stanier

stanier

Mechanical
Joined
May 20, 2001
Messages
2,442
Location
AU
What books/websites/courses would the Forum members recommend for the study of this subject. I use Pipeak for stress analysis and it has the capability of modelling systems subject to forced frequencies and to to do a modal analysis to determine the natural frequency of the system.

I would like to more fully understand the subject,

Thank you in anticipation
 
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question Question
Rutman Fastener Modelling in Patran
Replies
2
Views
3K
Alex Szatmary
Alex Szatmary
F
  • Locked
  • Question Question
Modelling clearance holes MSC Nastran/patran sol 400
Replies
2
Views
2K
SWComposites
SWComposites
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
Jb2024
  • Locked
  • Question Question
FE modelling of three-edge supported plate under simply-support
Replies
11
Views
1K
jhardy1
jhardy1
G
  • Locked
  • Question Question
Modelling a post-tensioned stone arch or beam in Strand7
Replies
3
Views
2K
Gigi2000
G

Part and Inventory Search

Sponsor

Back
Top