Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vibration instrument rental

Status
Not open for further replies.

Jekamobile

Mechanical
Joined
Aug 12, 2011
Messages
5
Location
CA
Hello everyone.
I need to collect a set of online vibration data from screw compressor during a shut down.
At this moment I am looking for the company which can rent out a multichannel data acquisition system, similar to ADRE, ZonicBook, Data Physics, etc. together with Software here in Canada, Alberta
It should be system with 8 up to 16 channels plus tach channel.
Really appreciate if somebody can give me a hint or link to the right guys.
Many thanks in advance.
 
Have you considered talking to someone like NTS:
While getting a recorder, sensors, and software results in something that resembles the stuff that a vibe test lab has, what's lacking is the calibration and expertise. Seems to me there is some risk of burning a truckload of calories and dollars chasing down gremlins and problems that a known, dedicated, hardware system might have already solved.

TTFN
faq731-376
7ofakss

Need help writing a question or understanding a reply? forum1529

Of course I can. I can do anything. I can do absolutely anything. I'm an expert!
 
IRstuff
Thanks for reply. I used to work for a long time as a Fiels Service Engineer hense, there will not be lack of experience , I guess. I need just a proper instrument to do it.
It would be simple shutdown of the big compressor with possible issues. The recorded data interpretation will help to discover them.
Regards!
 
GregLocock
I checked the Google for Techrentals, thank you very much. What I found so far:
It looks like they serve only three regions: Australia, New Zealand, Malasia.
I am in Canada. Plus, they do not have what I am looking for.
Thanks for assistance!
 
Tmoose.
Thank you very much for a great link
 
Thank you Walt for reply. I will check them out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top