Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

vericut

Status
Not open for further replies.
gang1

gang1

Industrial
Joined
Aug 10, 2003
Messages
12
Location
RU
It is for those who uses Vericut to check the paths simulated in proNC.
When I use solid models consisting of both a holder and a cutter as cutting tools I can't send my NC-files and sequences into Vericut.
Does anyone know what's the deal?
 
Sort by date Sort by votes
I have the same problem. I use Proe2001 and cannot get Vericut to import solid tools created in Pro. Ive have been told it is a bug in the version of vericut bundled with Pro. Hopefully this will be fixed in later releases. I realise this doesnt help, but at least you are not alone.

Dav
 
Upvote 0 Downvote
Nevertheless,
Thank you Dav
 
Upvote 0 Downvote
Vericut version 5.2 which is bundled with Wildfire allows the use of solid models as cutting tools and shows their movement while running. Previous versions of vericut did not support this option. I know it didn't help, but it is info. Good luck
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

C
Vericut
Replies
1
Views
3K
cpaine
C
I
Mapkey - Vericut
Replies
0
Views
2K
iharter
I
C
Vericut with rotary axis work.
Replies
0
Views
3K
ckirchen
C
P
Vericut rtraining files
Replies
0
Views
3K
proone
P
B
creo vs vericut
Replies
1
Views
5K
BoxXxoN
B

Part and Inventory Search

Sponsor

Back
Top