Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Velocity Boundary Condition Help!

Status
Not open for further replies.

mmmbordo643

New member
Joined
Feb 24, 2006
Messages
31
Location
US
Hello all,

I am trying to impose a velocity boundary condition on an analytical rigid surface. I have set the time period to 0.0305 seconds, V2 to -100 (mm/s) and the Smooth step amplitude to (0,1; 0.0305, 1). I am trying to get a displacement for the rigid surface of 3.05 mm, However using these criterion it is only displacing 2.65 mm. Any ideas??

Thanks in advance,
Chris
 
Maybe the rigid surface has got stuck on something?

corus
 
Hey mmmbordo643,

do you solve your problem? Because I want to have a displacement of 2 mm and I get more than 1 cm!!

Thanks
Engelien
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top