Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NO FLOW boundary condition

Status
Not open for further replies.
AC1999

AC1999

Geotechnical
Joined
Jul 31, 2024
Messages
6
Location
IN
How do define a 'no flow' boundary condition in ABAQUS for coupled pore fluid diffusion and stress analysis?
 
Sort by date Sort by votes
Impermeability is the natural boundary condition in those simulations so you don't have to specify it manually if that's what you need. You can prescribe pore pressure (also 0) as a boundary condition though.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
alegio20
  • Locked
  • Question Question
How to define an elastic boundary condition? Rotational in my case
Replies
4
Views
478
alegio20
alegio20
FBMeca
  • Locked
  • Question Question
Symmetry Boundary Condition Circular Edge
Replies
2
Views
361
FBMeca
FBMeca
Tinni1
  • Locked
  • Question Question
Abaqus error in in keyword *BOUNDARY
Replies
8
Views
978
Tinni1
Tinni1

Part and Inventory Search

Sponsor

Back
Top