Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

VB409 with DC as input

Status
Not open for further replies.
Reinhold

Reinhold

Electrical
Joined
Feb 21, 2003
Messages
1
Location
DE
Hello,

Would it be possible to use the VB409 with DC as input? Would it still work?

I have about 18V to 150V DC, but I need regulated 5V. Would it be possible, if I connect the potential divider to output2 instead of connecting it to the input. Does anyone know if this could work? Could the VB409 handle the high input Voltage?

Thanks
Reinhold
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
Gas turbine tripped with "LONG DC RUN TIME"
Replies
2
Views
6K
reza1977
R
Nayeem1993
  • Question Question
Problem in substation DC system
Replies
3
Views
14K
waross
waross
Distribution73
  • Locked
  • Question Question
Auxiliary Tripping Relay: Use of parts with reduced coil DC ratings for faster operation. Typical Circuit Doubt.
Replies
5
Views
5K
Distribution73
Distribution73
Yuma
  • Locked
  • Question Question
DC circuit breaker capacity vs time constant
Replies
8
Views
3K
waross
waross
NickParker
  • Question Question
Gas tight cables - Gel as filler
Replies
1
Views
3K
7anoter4
7anoter4

Part and Inventory Search

Sponsor

Back
Top