Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Variable contour path: Max. Tool Axis Change

Status
Not open for further replies.
kukelyk

kukelyk

Industrial
Joined
Mar 21, 2005
Messages
315
Location
HU
We have five axis machines with Heidenhain controls. Could anyone please suggest some values for 'Max. Tool Axis Change' option for semi and finishing paths? Tolerances are +/-0,01mm and +/-0,003mm. (M128 milling)
We have large mold parts, where we use turnmilling. Tilting is 10..30 degrees.
Thanks in advance.



----
kukelyk
 
Status
Not open for further replies.

Similar threads

Dbfoster24
  • Locked
  • Question Question
Shop Doc Variable for OVL of Tool Assembly? Also Tool Image?
Replies
0
Views
434
Dbfoster24
Dbfoster24
Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
K
  • Locked
  • Question Question
Sew: tool does not share a common boundary
Replies
3
Views
2K
cowski
cowski
AlexCLE
  • Locked
  • Question Question
Post builder change full circles to shorter arcs
Replies
0
Views
1K
AlexCLE
AlexCLE
gluten02
  • Locked
  • Question Question
Can't figure out deform tool
Replies
1
Views
411
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top