Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valves for High Temp Seawater service

Status
Not open for further replies.
FIF99

FIF99

Materials
Joined
Jul 20, 2005
Messages
96
Location
NL
Hi,

Could somebody give me some advise regarding valve stem seals and bonnet gaskets for valves in high temp seawater service with flue gas (above 400°C). Graphite is not an option due to possible galvanic action.
Does anybody have experience with alternative materials/solutions within this application?

Thanks in advance for any help.

Regards,
 
Status
Not open for further replies.

Similar threads

V
  • Question Question
Bolts and Nuts for High-Temperature Applications – Ambiguities in European Standards
Replies
15
Views
11K
dtimberlake
D
Johnwoo1991
  • Locked
  • Question Question
F9 and F91 steel for low temp
Replies
1
Views
2K
EdStainless
EdStainless
Scott Price
  • Locked
  • Question Question
Magnetic Materials for moderately high temperature use
Replies
3
Views
792
Scott Price
Scott Price
af09
  • Locked
  • Question Question
Bolting for Cryogenic Service
Replies
5
Views
662
WKTaylor
WKTaylor
TiCl4
  • Locked
  • Question Question
Reactor MoC : High Salt Concentration
Replies
12
Views
5K
TiCl4
TiCl4

Part and Inventory Search

Sponsor

Back
Top