Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

V5 feature to V4 primitives

Status
Not open for further replies.

sapatak

New member
Joined
Jan 20, 2003
Messages
27
Location
CA
There are rhumors that it is possible to convert V5 solid features to V4 primitives when saving a CATPart as model.
If anyone has information on that, let me know.
 
I'm pretty sure that they are just rumors. All I have ever seen is a Volumetric Solid saved back to V4.
 
Hi,

Yep, only rumors. But with a little patient (and imagination) you can rebuild the solid using that volumetric solid (I mean the edges of that solid).

Sometimes its easier to rebuild from scratch. In this case you will have also the whole history.

Regards
Fernando
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top