Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using TARGE 170 & CONTA 173 to connect SOLID65 & SHELL 43

Status
Not open for further replies.
Ahmedarhman

Ahmedarhman

Structural
Joined
Sep 6, 2014
Messages
10
Location
EG
I'm trying to use ANSYS to model a composite steel(shell43)-concrete(solid65) beam using contact service (targe170 & conta173) and shear connectors(beam 189)- could you please provide me with some suggestion, recommendations and steps.
 
Status
Not open for further replies.

Similar threads

R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
815
Rabea-19
R
andradesilva
  • Locked
  • Question Question
thin-walled 3D solid to a shell
Replies
1
Views
486
Stick.
Stick.
M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
alpha000
  • Locked
  • Question Question
Bend straight beam to circular helix
Replies
1
Views
2K
Doug Hunter
Doug Hunter
AndrewSkocz
  • Locked
  • Question Question
Ansys - Solving an input file using command line
Replies
3
Views
1K
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top