Feb 7, 2021 #1 maatoug Mechanical Joined Feb 5, 2020 Messages 14 Location DZ Please to advice , Which is better HDPE chilled water pipes or carbon steel pipes
Feb 7, 2021 #2 LittleInch Petroleum Joined Mar 27, 2013 Messages 22,906 Location GB Define "better".... Cheaper Easier to construct More able to resist damage Corrosion free Something else? Only then can you say something is "better" than something else. Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
Define "better".... Cheaper Easier to construct More able to resist damage Corrosion free Something else? Only then can you say something is "better" than something else. Remember - More details = better answers Also: If you get a response it's polite to respond to it.
Feb 7, 2021 Thread starter #3 maatoug Mechanical Joined Feb 5, 2020 Messages 14 Location DZ agreed, better means later on in operation which is robust and maintainable. kind regards Upvote 0 Downvote
Feb 7, 2021 #4 EnergyProfessional Mechanical Joined Jan 20, 2010 Messages 1,279 Location US What fluid, temperature, installation location, likelihood of damage? while we are at it, which car is best for me? I don't tell you anything about me, but still expect you to give me good advice. Upvote 0 Downvote
What fluid, temperature, installation location, likelihood of damage? while we are at it, which car is best for me? I don't tell you anything about me, but still expect you to give me good advice.
Feb 7, 2021 #5 LittleInch Petroleum Joined Mar 27, 2013 Messages 22,906 Location GB Not much in it. Steel can corrode if you don't protect it or prevent condensation forming, PE doesn't. PE can creep, say and get brittle. PE is a little easier to cut and insert a repair or new connection, but steel not far behind. Very vague question with no information so equally vague answer. Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
Not much in it. Steel can corrode if you don't protect it or prevent condensation forming, PE doesn't. PE can creep, say and get brittle. PE is a little easier to cut and insert a repair or new connection, but steel not far behind. Very vague question with no information so equally vague answer. Remember - More details = better answers Also: If you get a response it's polite to respond to it.