Jan 15, 2021 #1 Jaivishnu Mechanical Joined Jan 15, 2021 Messages 10 Location IN Hi, Can a Coriolis mass flowmeter sized for gas flow measurement be used for liquid flow measurement also?
Hi, Can a Coriolis mass flowmeter sized for gas flow measurement be used for liquid flow measurement also?
Jan 15, 2021 1 #2 Latexman Chemical Joined Sep 24, 2003 Messages 6,952 Location US Yes, mass flow rate is what it detects. But beware, most have difficulty during the switching from one fluid phase to the other. It crashes the software. There are a few on the market that are supposed to have solved this. Good Luck, Latexman Upvote 0 Downvote
Yes, mass flow rate is what it detects. But beware, most have difficulty during the switching from one fluid phase to the other. It crashes the software. There are a few on the market that are supposed to have solved this. Good Luck, Latexman
Jan 15, 2021 #3 Compositepro Chemical Joined Oct 22, 2003 Messages 7,841 Location US I do not know if they have gotten any better in recent years, but in my experience, they do not respond well to bubbles in the fluid. Upvote 0 Downvote
I do not know if they have gotten any better in recent years, but in my experience, they do not respond well to bubbles in the fluid.
Jan 15, 2021 #4 Latexman Chemical Joined Sep 24, 2003 Messages 6,952 Location US Yep, rebooting mass flow meters is not an uncommon activity in a chemical plant. Good Luck, Latexman Upvote 0 Downvote