Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Use bar material as main body of a pressure vessel

Status
Not open for further replies.
jamesl

jamesl

Mechanical
Joined
Oct 16, 2002
Messages
247
Location
US
Does ASME Section VIII, Div.2 allow the use of bored bar stock to produce the main body (shell) of a pressure vessel?
I know with Div.1, you can do it with some code cases.
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
R Stamping a non-U Stamped Pressure Vessel
Replies
2
Views
4K
jt1234
jt1234
A8yssUK
  • Locked
  • Question Question
High pressure "vessel" inside a vacuum chamber.
Replies
6
Views
2K
EdStainless
EdStainless
A
  • Locked
  • Question Question
Singularity rectangular boiler / Pressure vessel
Replies
1
Views
2K
TGS4
TGS4
Jayander
  • Locked
  • Question Question
pressure vessel
Replies
5
Views
1K
JStephen
JStephen
IdanPV
  • Locked
  • Question Question
Pressure Vessel Door Replacement
Replies
1
Views
2K
A8yssUK
A8yssUK

Part and Inventory Search

Sponsor

Back
Top