Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Upgrading Win XP Pro SP2 to SP3 with WF3
- Thread starter Mechie10
- Start date
Hello Mechie,
I moved from SP2 to SP3 whilst using Wildfire 3.0 without any problems. I cant remember what date code I was on though at the time, you might want to check the support pages of PTC.com to be doubly sure that you datecode wont experience any issues.
Paul Cunningham
Project Engineer (Mechanical)
I moved from SP2 to SP3 whilst using Wildfire 3.0 without any problems. I cant remember what date code I was on though at the time, you might want to check the support pages of PTC.com to be doubly sure that you datecode wont experience any issues.
Paul Cunningham
Project Engineer (Mechanical)
- Status
Similar threads
- Locked
- Question
- Solved
- Locked
- Helpful tip