Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unit precision
- Thread starter careyc
- Start date
Edgeomatic
Mechanical
From the "File" menu, click: "File Properties" and select the "Units" tab.
- Thread starter
- #3
beachcomber
Mechanical
Hi careyc,
Be aware that this setting is for DATA READOUT ONLY.
It's NOT a working accuracy that your input will be rounded to, so make sure that any dimensional constraints you put in are the exact values you require.
Many times I've seen users frustrated that their models will not mate together, only to find that the actual dimension is not what they thought it was.
bc
Be aware that this setting is for DATA READOUT ONLY.
It's NOT a working accuracy that your input will be rounded to, so make sure that any dimensional constraints you put in are the exact values you require.
Many times I've seen users frustrated that their models will not mate together, only to find that the actual dimension is not what they thought it was.
bc
- Status
Similar threads
- Locked
- Helpful tip