G
gangs13
Guest
Hi
I am unable to change units of part
When I select desired unit 'set' tab dosent highlight..
I am unable to change units of part
When I select desired unit 'set' tab dosent highlight..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Thread starter
- #2
D
dgs
Guest
What version of Proe / Creo? Part mode or assembly mode?
- Thread starter
- #3
D
dr_gallup
Guest
Is the part an instance? Can only change units in the generic.
- Thread starter
- #4
Y
yardymichael
Guest
Steering rack is a component which determines how much your car wheels are going
to turn when you turn the steering wheel. Your vehicle relies on the steering rack
to point your vehicle in the right direction. A steering rack usually lasts at least 150,000 miles based on the quality
of the rack, the road conditions you drive on, and how well you maintain your
vehicle. Without a proper working steering rack, it will become difficult to
operate your car.
to turn when you turn the steering wheel. Your vehicle relies on the steering rack
to point your vehicle in the right direction. A steering rack usually lasts at least 150,000 miles based on the quality
of the rack, the road conditions you drive on, and how well you maintain your
vehicle. Without a proper working steering rack, it will become difficult to
operate your car.
Similar threads
- Locked
- Question
- Locked
- Question