UNEF threading from Hole-Wizard?

[bnmorgan]

Anyone have or know where I might find whatever is needed to have SolidWorks lay in UNEF thread profiles? I'm needing to drop a 1/2"-28 thread onto a part but don't have much information to do it with, and am suprized to find now that SW doesn't have the UNEF...odd as they are I suppose.

All help is appreciated.
Thank you much
Byron

SolidWorks 2007
NX4
Mayline 1947

 

[CorBlimeyLimey]

http://www.efunda.com/DesignStandards/screws/screwunef.cfm

 

[Heckler]

You could download MIL-S-8879 from

http://assist.daps.dla.mil/quicksearch/

Or the Machinery's HDBK will have that thread data.

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best

 

[handleman]

Also, check out faq559-1183.