Unable to find detailed info on Sch40 Black Steel Pipe fittings

[Cubert]

I have been searching for dimensional information for pipe fittings for black steel pipe (schedule 40).

I need info on how far a tee extends from the main pipe, length of bends, 45d, 22.5, wyes, etc, things like that.

I have been been trying to find a catalog or something online but I have not been successful.

Can anyone point me in the right direction? I would prefer a link if possible.

Thanks!

 

[bimr]

http://www.engineeringtoolbox.com/ansi-steel-pipes-d_305.html

http://www.midlandindustrial.com/product.php?cat=Nipples+and+Fittings&shape_skip=1

Note: Dimensions are on catalog page.

 

[wannabeSE]

Try Ward Manufacturung:

http://wardfittings.com/Assets/PDFs/0902CatalogColorOld.pdf

 

[bimr]

Note the difference between pipe schedule and pipe class:

http://wiki.answers.com/Q/What_is_the_difference_between_pipe_schedule_and_class

http://geoheat.oit.edu/pdf/tp55.pdf

 

[Cubert]

All great posts, thank you!

FYI, I work with insulated Chilled Water systems and some of the service pipes, which are black steel, (not including the insulation) run about 12"+. The most difficult part of what we do is determining these fittings in design and then transferring them to a 3D design program, Civil 3D for instance. There's just too much room for error especially during crunch time.

I'm trying to create parametric models for these, but am also considering purchasing a third party software.

See this one here by CAD-1:

http://www.cad-1.com/Content/PartBuilder.aspx

Thanks for the help!