Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ULTRASONIC TEST REQUIREMENT AS PER ASME SECTION V & VIII

Status
Not open for further replies.

Sumit bhadakwad

Mechanical
Joined
Jul 28, 2019
Messages
16
Location
IN
Hello everyone experts , I want help from all of you .

We are going to manufacture a base frame in which no.of different size thickness plates are used

But our client said above 25 mm thickness , UT is mandatory .

IS it mandatory ? If yes where it is given in ASME.
 
Sorry but you are wasting peoples time with your question.
1 If the client wants it then it is mandatory (if it is in your contract documents) irrespective of what the code states.
2 If it is not in your contract documents then ask the client where it is noted in ASME.

You are fabricating a base frame in accordance with ASME VIII ?
 
Hello everyone ,

If have any answer plz tell me . Ut as per ASME .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top