Manufacturer02
Mechanical
1. Is there any exemption to use lower thickness material for shell, roof and bottom if the material is SS 304L? ULC S601 does not clarify min. thickness requirement for stainless steel material.
2. As per clause A1.4- The tensile stress level has been limited to 40% of maximum allowable design stress in order to accommodate ambient temperatures below -37.2 C. Does it applicable to SS304L material as well?
2. As per clause A1.4- The tensile stress level has been limited to 40% of maximum allowable design stress in order to accommodate ambient temperatures below -37.2 C. Does it applicable to SS304L material as well?
