Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UG Certification

Status
Not open for further replies.

WorkingLife

Mechanical
Joined
Jun 1, 2004
Messages
21
Location
CA
Has anyone done the Ug certification test?

I went to their website and have read through the topics, but I didn't find any sample tests on there.

Are there any sample tests that I can find on the web?

Thanks.
 
Thanks.

Do you sort of remember how the test is outlined? Like if there's hands on an multiple choice, stuff like that?
 
It was 100% hands on, with UG. Covered assemblies, mating conditions, modeling, changing models, etc. The example test covered everything pretty good, I went thru it twice before I took the real certification test.

The test also has time limits for the sections, but time wasn't really an issue, I felt there was plenty to complete the exercises.

-Dave
Everything should be designed as simple as possible, but not simpler.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top