Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UG-101 Inspector

Status
Not open for further replies.
Anavar

Anavar

Industrial
Joined
Mar 30, 2018
Messages
2
Location
PL
Greetings,
I have a question concerning burst testing acc. to UG-101. If the vessel is designed as the UM and has no CRN requirements, is it possible to make a burst test in a presence CI instead of AI?
 
Status
Not open for further replies.

Similar threads

shubh7725
  • Locked
  • Question Question
ASME Auditor/Inspector Validate Software licenes copy
Replies
7
Views
737
weldstan
weldstan
MUHAMMAD FAHAD RANA
  • Locked
  • Question Question
Engagement of ASME Authorized Inspector if vessel is not ASME Certified "U" Designator
Replies
12
Views
1K
ethan18
ethan18
JoeSeag
  • Locked
  • Question Question
ASME VIII UG-44(b)
Replies
16
Views
4K
TGS4
TGS4
Mech_ash19
  • Locked
  • Question Question
ASME VIII-1 UG-44(b) - External Loads on Standard Flange - Analysis Options for Slip-On Flanges
Replies
2
Views
1K
Mech_ash19
Mech_ash19
Zoltan Racz
  • Locked
  • Question Question
ASME BPVC.VIII.1-2015, UG-127, section (3-c-1)
Replies
3
Views
599
IdanPV
IdanPV

Part and Inventory Search

Sponsor

Back
Top