Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UDF REFERENCES

Status
Not open for further replies.

troy06

Mechanical
Joined
Jul 21, 2006
Messages
53
Location
US
I am trying to create a counter bore UDF but I only need two references to locate it,the top surface and the axis.Pro E wants me to select a third reference, surface or plane.The thru hole will already be there but not always a plane going through it.Any ideas??
 
You might want to do an Info-->Parent/Child on the original features that made up the UDF to find out why its asking you for a plane.
 
Was it a sketched counterbore hole? That might be the required 3rd reference, sketching plane. If it was just the default hole w/ counterbore feature then I am out of ideas
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top