Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

U-Stamp certification

Status
Not open for further replies.
Ralph Hardt _MK

Ralph Hardt _MK

Industrial
Joined
Oct 29, 2018
Messages
1
Location
DE
Dear all,
we are a Producer of lube oil Systems according to PED in Europe. Our plan is to get into the API marked with our lube oil Systems. Is it required to achieve an U-Stamp certification as manufacturerer of the lube oil System? Or is it ok just to certify the Welding processes according to ASME Code IX? We are only manufacturing the pipes. All other componentes are purchased.

Thanks in Advance for your help.

Regards
Ralph
 
Status
Not open for further replies.

Similar threads

Resegone
  • Locked
  • Question Question
R Stamp or Is enough U stamp?
Replies
4
Views
1K
weldstan
weldstan
M
  • Question Question
R Stamping a non-U Stamped Pressure Vessel
Replies
2
Views
4K
jt1234
jt1234
Inchtain
  • Locked
  • Question Question
PED or ASME Stamp
Replies
12
Views
3K
m.bagattini
m.bagattini
Elnur250774
  • Locked
  • Question Question
ASME VIII and U stamp vessel requirements for fabricator
Replies
2
Views
557
Christine74
Christine74
CrisDom
  • Locked
  • Question Question
UW-20 for U-tube HE
Replies
2
Views
739
CrisDom
CrisDom

Part and Inventory Search

Sponsor

Back
Top