Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Types of Powerstation's Anti-Icing system?!?

Status
Not open for further replies.

daviwy

Mechanical
Oct 14, 2008
49
Can you please let me know of different designs of anti-icing systems that can be used on different powerstations?


Please do drop more information or knowledge you have on this subject they will all be taken in and appreciated.


David O.
Mechanical Engineer
Graduate as of: 2007
Oil, Gas & Power
 
Replies continue below

Recommended for you

On gas turbines, for Anti Icing of Compressor blades, hot air is taken from the later stages of the compressor and introduced upstream of the intake filter. This air is only introduced when icing conditions are present because it affects the performance of the GT adversely
 
Anti-icing is also done with Propylene Glycol/water heated by exhaust heat and by air heated by exhaust heat. Some turbine firing methods don't allow the luxury of robbing compressor bleed air. If a turbine has chiller coils, the PG water is just put into the chiller coils. If not, then dedicated coils have to be added to the air filter air path.

rmw
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor