Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TYE of 6063-T832??

Status
Not open for further replies.
NorthJ

NorthJ

Mechanical
Joined
Jun 14, 2005
Messages
13
Location
US
Does any one have the TYE of 6063-T832 drawn tube? I had a link in my favorites of a materials .org site that had pretty much everything it was like mtls.org but lost it. If some one can give me the info or the site or both, Id be greatful thanks.

Joe
 
Sort by date Sort by votes
My Aluminum Association book shows UTS of 41ksi min; TYS of 36ksi min and %E of 5 min. This is for wall thickness up to .049". For heavier wall, UTS &TYS drop by 1ksi.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
Measurement of gamma prime in superalloys.
Replies
2
Views
8K
absaul02
A
A
  • Question Question
Heat treatment of 17-4PH separately cast specimens
Replies
13
Views
14K
mfgenggear
mfgenggear
efulm4444
  • Question Question
Strength of C36000 Brass at Elevated Temperatures
Replies
1
Views
521
MintJulep
M
mrmalcolm
  • Question Question
Non destructive testing of heavy thick plates
Replies
14
Views
10K
mrmalcolm
mrmalcolm
PRjuventus
  • Locked
  • Question Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus

Part and Inventory Search

Sponsor

Back
Top