cricrux
Mechanical
- Aug 18, 2015
- 1
Good morning. I'm working with Workbench V.16.0, and I have a question about the Coupled-field analysis; I'd like to know if, eventually, is possible and how to execute a two-way coupling between the thermical field and the structural field.
My work consists in two bodies initially situated in contact, which are at two different temperatures; under some load conditions, one of them pushes against the other. I'd like to evaluate simultanously both the thermical and structural evolution. I wonder if that is possibile ,working in "static Structural", setting in the "APDL module" a thermic contact between two bodies, which describes the heat conduction, putting some code lines in the "command line" of Workbench.
Thanks
My work consists in two bodies initially situated in contact, which are at two different temperatures; under some load conditions, one of them pushes against the other. I'd like to evaluate simultanously both the thermical and structural evolution. I wonder if that is possibile ,working in "static Structural", setting in the "APDL module" a thermic contact between two bodies, which describes the heat conduction, putting some code lines in the "command line" of Workbench.
Thanks
