I just reloaded V20 Solid Edge on WIN7. Took a trick to get it loaded but it's up and running. The only thing not running is when the tutorial is running it launches the right panes but the part for the selected tutorial does not get loaded. No idea how to get the part loaded.....
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tutorial Part in V20 doesn't load
- Thread starter JK1946
- Start date
Might be a missing a dll, especially if you're running 64 bit.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
Or, if 64 bit it may just be that the file paths are messed up.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
