Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to add bulk components in to the assembly.

Status
Not open for further replies.
Vikas4auto2019

Vikas4auto2019

Mechanical
Joined
Sep 23, 2019
Messages
13
Location
US
I wanted to add 800+ components to the assembly.
constraining is not important here. just being that all part in a single assembly is imp. in this case.

Can anyone suggest the easiest way to drag all parts from the folder into the assembly?
Using Solid Edge 2020 classic

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
VBA to Pull Total Surface Area and Volume for a Part of an Assembly?
Replies
0
Views
1K
jdconnel
J
NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
1K
NirVidP
NirVidP
jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
dakeb
  • Locked
  • Question Question
Assembly Save As
Replies
2
Views
1K
dakeb
dakeb
RC-o2
  • Locked
  • Question Question
The rollback event cannot allow saving of the active document because we could not get valid pointer
Replies
0
Views
934
RC-o2
RC-o2

Part and Inventory Search

Sponsor

Back
Top