Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TURN POSTPROCESSOR WITH HEIDENHAIN CONTROL

Status
Not open for further replies.
LayKanae

LayKanae

Industrial
Joined
Jul 28, 2014
Messages
23
Location
MX
Hello Guys

Does anyone has used or created a postprocesor for turning with TNC control
in NX ? is it posible?

I have not found any examples in postbuilder an i have problems starting from
zero in this post.

Do you know where can i find an example to start from of this post?

Thanks
 
Status
Not open for further replies.

Similar threads

Carbonated
  • Question Question
Distance constraint incompatible with cylindrical
Replies
2
Views
5K
Carbonated
Carbonated
MANox
  • Locked
  • Question Question
Hole with fit
Replies
0
Views
2K
MANox
MANox
P
  • Question Question
any company/individual with a NX licese for sale?
Replies
2
Views
2K
peritoind
P
A
  • Locked
  • Question Question
NX10/TC11. Problem with background saving CGM
Replies
2
Views
1K
Argmnt
A
A
  • Locked
  • Question Question
Filling Internal Volume Of Part With No Model History
Replies
5
Views
4K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top