Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Turbulence flow in mold cooling channel

Status
Not open for further replies.
deenor

deenor

Chemical
Dec 1, 2002
14
Does anyone know about turbulence flow inducer placed inside the cooling channel of a mold? The purpose is to produce turbulence flow that can help to improve heat exchange. I read it once in a magazine but can't remember the details.

Regards
Deen
 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
862
Buckshott00
Buckshott00
clyde Verse
  • Locked
  • Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
1K
Pud
Pud
cityjack
  • Locked
  • Question
Mold program to 3D model. How?
Replies
0
Views
182
cityjack
cityjack
Splint
  • Locked
  • Question
Rotomolding materials suppliers in Australia - small quantities
Replies
0
Views
714
Splint
Splint
Tegguy
  • Locked
  • Question
Creep in 3D printed Nylon
Replies
12
Views
2K
Tegguy
Tegguy

Part and Inventory Search

Sponsor

Back
Top Bottom