Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TRIBUTARY AREA SAP 2000 V8

Status
Not open for further replies.
jorgeaguilar

jorgeaguilar

Civil/Environmental
Joined
Dec 21, 2004
Messages
1
Location
US
I want to apply a roof load by using an area element so it will be distributed to the supporting elements automatically with the tributary area corresponding to each element, but something is not right. All the modifiers of the area element are zero because I just need to apply the roof load to that area. What am I doing wrong? What is the correct procedure to apply a roof load and that it will be dsitributed automatically by their tribuary area.

Thanks for the help
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
SAP 2000 - Center of Mass and Center of Rigidity
Replies
0
Views
5K
Neeka
N
giofed
  • Locked
  • Question Question
SAP 2000 Shell twisting moment
Replies
1
Views
1K
JoshPlumSE
JoshPlumSE
a_urbs
  • Locked
  • Question Question
Using Section Cuts in SAP for Storey Weight
Replies
0
Views
1K
a_urbs
a_urbs
CivilMEng
  • Locked
  • Question Question
area load confusion greenhouse
Replies
4
Views
1K
CivilMEng
CivilMEng
Luca_S
  • Locked
  • Question Question
Unanchored support in SAP 2000
Replies
0
Views
409
Luca_S
Luca_S

Part and Inventory Search

Sponsor

Back
Top