deepak1977
Mechanical
- Mar 15, 2007
- 1
Does a Total Tun Out Call out on the part also controls the concentricity?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Total run out & concentricity
- Thread starter deepak1977
- Start date
- Status
ASME Y14.5-1994
Section 6.7.1.2.1 - Circular run-out may be used to control the cumulative variations of circularity and coaxiality.
Section 6.7.1.2.2 - total run-out is used to control cumulative variations of circularity, straightness, coaxiality, angularity, taper and profile of a surface.
Heckler
Sr. Mechanical Engineer
SWx 2007 SP 2.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)
(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best
Section 6.7.1.2.1 - Circular run-out may be used to control the cumulative variations of circularity and coaxiality.
Section 6.7.1.2.2 - total run-out is used to control cumulative variations of circularity, straightness, coaxiality, angularity, taper and profile of a surface.
Heckler
Sr. Mechanical Engineer
SWx 2007 SP 2.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)
(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best
Yes - total runout and also circular runout control concentricity.
Circular runout controls roundness and concentricity while total runout includes circular runout but also controls the shape of the feature.
Positional tolerances can also be used to control concentricity.
Dave D.
Circular runout controls roundness and concentricity while total runout includes circular runout but also controls the shape of the feature.
Positional tolerances can also be used to control concentricity.
Dave D.
- Status
Similar threads
- Locked
- Question