shawnpeter
Mechanical
is there a "rough" percentage of how much torque is lost when using a swivel socket versus a standard socket?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
torque loss using a swivel socket
- Thread starter shawnpeter
- Start date
- Status
GregLocock
Automotive
Bear in mind the non uniform velocity ratio across the joint will affect the torque. But if you mean losses due to friction etc, not much.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
- Status
Similar threads
- Question
- Locked
- Question