Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tool Description Variable

Status
Not open for further replies.
MtnJunkie360

MtnJunkie360

Aerospace
Joined
Jul 30, 2013
Messages
15
Location
US
In NX 8.5, when using a tool from the library, there is the catalog name...
But if you click in to edit the tool, there is also a tool description ie... tool UGTI0201_012 has a description of " End Mill 1/2" "
is there a mom variable to pull this description into post builder?
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Dbfoster24
  • Locked
  • Question Question
Shop Doc Variable for OVL of Tool Assembly? Also Tool Image?
Replies
0
Views
403
Dbfoster24
Dbfoster24
CADologist
  • Locked
  • Helpful tip Helpful tip
NX Journal - Assign Material to All bodies in part; Assign Description to "Description Attribut
Replies
0
Views
610
CADologist
CADologist
Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
K
  • Locked
  • Question Question
Sew: tool does not share a common boundary
Replies
3
Views
2K
cowski
cowski
gluten02
  • Locked
  • Question Question
Can't figure out deform tool
Replies
1
Views
392
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top