title block - title on 2 lines? 1

[MMike1]

Ok so I have the dspcription on my part linked to my title block. Now the space on the sheet is pretty large. But my Description is too long, and it won't quite fit on a single line. Is there a clever way to get my description on two lines? If not I'm thinking of creating three lines, Description 1, 2 and 3. And then typing the name in that way.

Seems a little lame though.

 

[rgrayclamps]

Hi, MMike1:

I use "comments" property (in drawing documents) to store drawing "Description". As far as I know, "comments" is only property that allows you to used multiple lines text.

Alex

 

[Standing]

Check out this thread
Text wrapping in Title block
thread559-97361

Bradley

 

[J-C]

2006 will allow text wrapping finally. Doesn't help you now, but it's something to plan for.

Jason Capriotti
Smith & Nephew, Inc.

 

[Regg]

MMike1,

Also checkout thread559-116628

Regards,

Regg

 

[chancey]

Here is one way. Use line feed - Keep your ALT button pressed down while typing 0010 with the number pad and release.

 

[MMike1]

Chancey!! that's exactly what I needed!!!

sweet!!

 

[ctopher]

Chancey, good tip. But, will not wrap text.
Works well for adding a line.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP2.0 / PDMWorks 05
ctopher's home site

FAQ559-1100
FAQ559-716