Title Block NX 8.5

[KUSHAL767]

I am suppose to insert company Logo into Title Block in NX 8.5, However I am aware of the option of Import function. Rather my company wants to do it without using this. Help needed!!!

Thanks in Advance!!!!

 

[JohnRBaker]

What is the 'format' of your company logo? Technically the only thing that can 'inserted' to the Title Block itself is text. So unless your logo artwork is available as something like a TrueType font, there is no way to include it as an actual part of the Title Block.

There was a recent discussion on this topic of adding artwork (AKA logos) to your Drawing templates:

http://www.eng-tips.com/viewthread.cfm?qid=363145

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[KUSHAL767]

It is an artwork drawn onto the sheet. I have attached the a word of my company logo with different zoom versions with is string. Now help me out how to add this into my title block. I have gone through the thread you suggested. I am still bit confused.

Thanks

 

[JohnRBaker]

In this case, since it's an image file, you can't actually include it in the Title Block object itself, but once you have your Title Block placed on your Drawing Template, along with the Drawing border, you just add it as a 'Raster Image' onto the Drawing Template, superimposing it over the appropriate location relative to the 'Title Block'. This is what I did with the example I showed in that linked thread.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[KUSHAL767]

To be clear it is not an Image file. I just took screen shot for your reference. It contains lines, curves and splines which forms the company Logo.
I am attaching the original part file itself from version NX 8.5.

Though the previous information was much appreciated. As it is also an option to superimpose with the title block.

Thanks

 

[JohnRBaker]

Same difference. Only text, and the framework geometry of the Tabular Notes, can be included as part of an actual Title Block object. As for the fact that the logo is made-up of curves, in the end it might prove much more efficient to produce a .jpg or .png image of your company's logo and still go back and use the 'Raster Image' approach that I've described previously.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.