I need to find the pressure rating for a 1/2, 1, 2 inch titanium flange. I need to determine if the design stresses (Class 150) are less than the allowable stresses for a given temperature and pressure. Titanium is not specified in B16.5. What are your recommendations?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Titanium Flange Pressure Rating
- Thread starter SUPERJET
- Start date
SUPERJET,
Use the equation in ANNEX D of B16.5 to calculate the pressure rating. The allowable stress for cast titanium (ASTM B-367 grades C-2 and C-3) are listed in the ASME Boiler and Pressure Vessel Code. Allowable stress for wrought titanium and forgings are also listed in the code.
Use the equation in ANNEX D of B16.5 to calculate the pressure rating. The allowable stress for cast titanium (ASTM B-367 grades C-2 and C-3) are listed in the ASME Boiler and Pressure Vessel Code. Allowable stress for wrought titanium and forgings are also listed in the code.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question