Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tilt and Shift in Well Foundation

Status
Not open for further replies.
drokapil

drokapil

Structural
Joined
Jul 25, 2010
Messages
10
Location
NP
Dear All,

I am supervising the bridge with well foundation. How should I measure the tilt and shift in well ?
Also I go through the Morth Specification for well foundation Appendix 1200 but can't get it. Please help if someone have procedures for it.

Best Regards
 
Status
Not open for further replies.

Similar threads

K
  • Locked
  • Question Question
Construction of Foundation beside retaing wall and through existing pipes
Replies
0
Views
995
krishnandyn
K
Zack L
  • Locked
  • Question Question
Wall friction and its affect on sheet piles
Replies
2
Views
2K
EireChch
EireChch
A
  • Question Question
How to use SRM Inclusion in MIDAS GTS NX
Replies
0
Views
7K
abrarnth
A
Blackfairy
  • Locked
  • Question Question
Pavement Design Question and What to look for Boring logs (California)
Replies
0
Views
2K
Blackfairy
Blackfairy
E
  • Locked
  • Question Question
BEST CIVIL3D WORKFLOWS FOR SURFACE CREATION AND CUT&FILL ANALYSIS?
Replies
2
Views
1K
Emil's Dad
E

Part and Inventory Search

Sponsor

Back
Top