Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TIG+SMAW in INOX series 300

Status
Not open for further replies.
Calidad

Calidad

Mechanical
Sep 29, 2002
12
Hello Coleagues:


I'm looking for heat input values or ranges to apply in descripts procees when we weld inox series 300 as inox 304L.

Could anybody inform me about it?

Best regards

Calidad
calidad@integasa.com
 
Status
Not open for further replies.

Similar threads

K
  • Question
GTAW WPS using GTAW/SMAW PQR
Replies
7
Views
8K
A.Nour
A
Samingme755
  • Locked
  • Question
Asme B16.47 series A and B
Replies
1
Views
3K
LittleInch
LittleInch
Motivated Apprentice
  • Locked
  • Question
Diameter in ASME IX
Replies
2
Views
857
Motivated Apprentice
Motivated Apprentice
Drilling Integrity Super.
Formula for Calculating Basic Allowable Stresses in ASME B31.3
Replies
2
Views
4K
Geoff13
Geoff13
isoca
  • Locked
  • Question
Information to be reported in a CMTR
Replies
0
Views
1K
isoca
isoca

Part and Inventory Search

Sponsor

Back
Top Bottom